Long-cycling and High-voltage Solid State Lithium Metal Batteries Enabled by Fluorinated and Crosslinked Polyether Electrolytes.

Solid-state lithium metal batteries (LMBs), constructed through the in situ fabrication of polymer electrolytes, are considered a critical strategy for the next-generation battery systems with high energy density and enhanced safety. However, the constrained oxidation stability of polymers, such as the extensively utilized polyethers, limits their applications in high-voltage batteries and further energy density improvements. Herein, an in situ fabricated fluorinated and crosslinked polyether-based gel polymer electrolyte, FGPE, is presented, exhibiting a high oxidation potential (5.1 V). The fluorinated polyether significantly improves compatibility with both lithium metal and high-voltage cathode, attributed to the electron-withdrawing -CF3 group and the generated LiF-rich electrolyte/electrode interphase. Consequently, the solid-state Li||LiNi0.6Co0.2Mn0.2O2 batteries employing FGPE demonstrate exceptional cycling performances of 1000 cycles with 78 % retention, representing one of the best results ever reported for polymer electrolytes. Moreover, FGPE enables batteries to operate at 4.7 V, realizing the highest operating voltage of polyether-based batteries to date. Notably, our designed in situ FGPE provides the solid-state batteries with exceptional cycling stability even at practical conditions, including high cathode loading (21 mg cm-2) and industry-level 18650-type cylindrical cells (1.3 Ah, 500 cycles). This work provides critical insights into the development of oxidation-stable polymer electrolytes and the advancement of practical high-voltage LMBs.

In-Situ Cross-linked F- and P-Containing Solid Polymer Electrolyte for Long-Cycling and High-Safety Lithium Metal Batteries with Various Cathode Materials.

The practical application of lithium metal batteries (LMBs) has been hindered by limited cycle-life and safety concerns. To solve these problems, we develop a novel fluorinated phosphate cross-linker for gel polymer electrolyte in high-voltage LMBs, achieving superior electrochemical performance and high safety simultaneously. The fluorinated phosphate cross-linked gel polymer electrolyte (FP-GPE) by in-situ polymerization method not only demonstrates high oxidation stability but also exhibits excellent compatibility with lithium metal anode. LMBs utilizing FP-GPE realize stable cycling even at a high cut-off voltage of 4.6 V (vs Li/Li+) with various high-voltage cathode materials. The LiNi0.6Co0.2Mn0.2O2|FP-GPE|Li battery exhibits an ultralong cycle-life of 1200 cycles with an impressive capacity retention of 80.1 %. Furthermore, the FP-GPE-based batteries display excellent electrochemical performance even at practical conditions, such as high cathode mass loading (20.84 mg cm-2), ultrathin Li (20 µm), and a wide temperature range of -25 to 80 °C. Moreover, the first reported solid-state 18650 cylindrical LMBs have been successfully fabricated and demonstrate exceptional safety under mechanical abuse. Additionally, the industry-level 18650 cylindrical LiMn2O4|FP-GPE|Li4Ti5O12 cells demonstrate a remarkable cycle-life of 1400 cycles. Therefore, the impressive electrochemical performance and high safety in practical batteries demonstrate a substantial potential of well-designed FP-GPE for large-scale industrial applications.

High-speed flexible near-infrared organic photodiode for optical communication.

Optical communication is a particularly compelling technology for tackling the speed and capacity bottlenecks in data communication in modern society. Currently, the silicon photodetector plays a dominant role in high-speed optical communication across the visible-near-infrared spectrum. However, its intrinsic rigid structure, high working bias and low responsivity essentially limit its application in next-generation flexible optoelectronic devices. Herein, we report a narrow-bandgap non-fullerene acceptor (NFA) with a remarkable π-extension in the direction of both central and end units (CH17) with respect to the Y6 series, which demonstrates a more effective and compact 3D molecular packing, leading to lower trap states and energetic disorders in the photoactive film. Consequently, the optimized solution-processed organic photodetector (OPD) with CH17 exhibits a remarkable response time of 91 ns (λ = 880 nm) due to the high charge mobility and low parasitic capacitance, exceeding the values of most commercial Si photodiodes and all NFA-based OPDs operating in self-powered mode. More significantly, the flexible OPD exhibits negligible performance attenuation (<1%) after bending for 500 cycles, and maintains 96% of its initial performance even after 550 h of indoor exposure. Furthermore, the high-speed OPD demonstrates a high data transmission rate of 80 MHz with a bit error rate of 3.5 [Formula: see text] 10-4, meaning it has great potential in next-generation high-speed flexible optical communication systems.

Whey Protein Peptide Pro-Glu-Trp Ameliorates Hyperuricemia by Enhancing Intestinal Uric Acid Excretion, Modulating the Gut Microbiota, and Protecting the Intestinal Barrier in Rats.

Hyperuricemia (HUA) is a metabolic disorder characterized by an increase in the concentrations of uric acid (UA) in the bloodstream, intricately linked to the onset and progression of numerous chronic diseases. The tripeptide Pro-Glu-Trp (PEW) was identified as a xanthine oxidase (XOD) inhibitory peptide derived from whey protein, which was previously shown to mitigate HUA by suppressing UA synthesis and enhancing renal UA excretion. However, the effects of PEW on the intestinal UA excretion pathway remain unclear. This study investigated the impact of PEW on alleviating HUA in rats from the perspective of intestinal UA transport, gut microbiota, and intestinal barrier. The results indicated that PEW inhibited the XOD activity in the serum, jejunum, and ileum, ameliorated intestinal morphology changes and oxidative stress, and upregulated the expression of ABCG2 and GLUT9 in the small intestine. PEW reversed gut microbiota dysbiosis by decreasing the abundance of harmful bacteria (e.g., Bacteroides, Alloprevotella, and Desulfovibrio) and increasing the abundance of beneficial microbes (e.g., Muribaculaceae, Lactobacillus, and Ruminococcus) and elevated the concentration of short-chain fatty acids. PEW upregulated the expression of occludin and ZO-1 and decreased serum IL-1ß, IL-6, and TNF-α levels. Our findings suggested that PEW supplementation ameliorated HUA by enhancing intestinal UA excretion, modulating the gut microbiota, and restoring the intestinal barrier function.

CXCR4-overexpressed exosomes from cardiosphere-derived cells attenuate myocardial ischemia/reperfusion injury by transferring miRNA to macrophages and regulating macrophage polarization.

Cardiosphere-derived cells (CDCs) are emerging as ideal candidates for managing cardiac inflammation, albeit with some limitations. Recent literatures have indicated that exosomes secreted by CDCs with C-X-C motif chemokine receptor 4 (CXCR4) overexpression can promote cardiac function after myocardial infarction and there have been some reports of miRNAs involved in ischemia/reperfusion (I/R) therapy. Therefore, we are interested in the role of CXCR4-overexpressed CDC-derived exosomes in delivering specific miRNA after myocardial I/R injury. In this research, we first constructed CDC-derived exosomes that overexpressed CXCR4 and miR-27a-5p, miR-182, or miR-101a. Then, we co-cultured the engineered exosomes with RAW264.7 cells and injected them intravenously into myocardial I/R model mice. In vitro, results showed that proinflammatory cytokines levels in the culture supernatant were decreased and the expression of M2 phenotypic markers were increased. Administration of engineered exosomes improved cardiac function, reduced infarct size, alleviated macrophage infiltration, and regulated M2 macrophage polarization after myocardial I/R, suggesting their implications in cardiac injury repair.

α-Lactalbumin Peptide Asp-Gln-Trp Ameliorates Hepatic Steatosis and Oxidative Stress in Free Fatty Acids-Treated HepG2 Cells and High-Fat Diet-Induced NAFLD Mice by Activating the PPARα Pathway.

SCOPE: Dietary intervention has emerged as a promising strategy for the management of nonalcoholic fatty liver disease (NAFLD). The aim of this study is to investigate the ameliorative effects of the α-lactalbumin peptide Asp-Gln-Trp (DQW) against NAFLD and the underlying mechanism. METHODS AND RESULTS: The models of lipid metabolism disorders are established both in HepG2 cells and in C57BL/6J mice. The results demonstrate that DQW activates peroxisome proliferator-activated receptor α (PPARα) and subsequently ameliorates lipid deposition and oxidative stress in vitro. Interestingly, GW6471 markedly attenuates the modulatory effects of DQW on the PPARα pathway in HepG2 cells. Moreover, results of in vivo experiments indicate that DQW alleviates body weight gain, dyslipidemia, hepatic steatosis, and oxidative stress in high-fat-diet (HFD)-induced NAFLD mice. At the molecular level, DQW activates PPARα, subsequently enhances fatty acid ß-oxidation, and reduces lipogenesis, thereby ameliorating hepatic steatosis. Meanwhile, DQW may ameliorate liver injury and oxidative stress via activating the PPARα/nuclear-factor erythroid 2 (Nrf2)/heme-oxygenase 1 (HO-1) pathway. CONCLUSION: Those results indicate that α-lactalbumin peptide DQW may be an effective dietary supplement for alleviating NAFLD by alleviating lipid deposition and oxidative stress.

Effects of Ultra-High-Pressure Jet Processing on Casein Structure and Curdling Properties of Skimmed Bovine Milk.

Ultra-high-pressure jet processing (UHPJ) is a new non-thermal processing technique that can be employed for the homogenization and the sterilization of dairy products. However, the effects on dairy products are unknown when using UHPJ for homogenization and sterilization. Thus, this study aimed to investigate the effects of UHPJ on the sensory and curdling properties of skimmed milk and the casein structure in skimmed milk. Skimmed bovine milk was treated with UHPJ using different pressures (100, 150, 200, 250, 300 MPa) and casein was extracted by isoelectric precipitation. Subsequently, the average particle size, Zeta potential, contents of free sulfhydryl and disulfide bonds, secondary structure, and surface micromorphology were all used as evaluation indicators to explore the effects of UHPJ on the structure of casein. The results showed that with an increase of pressure, the free sulfhydryl group content changed irregularly, while the disulfide bond content increased from 1.085 to 3.0944 µmol/g. The content of α-helix and random coil in the casein decreased, while the ß-sheet content increased at 100, 150, 200 MPa pressure. However, treatment with higher pressures of 250 and 300 MPa had the opposite effect. The average particle size of the casein micelles first decreased to 167.47 nm and then increased up to 174.63 nm; the absolute value of Zeta potential decreased from 28.33 to 23.77 mV. Scanning electron microscopy analysis revealed that the casein micelles had fractured into flat, loose, porous structures under pressure instead of into large clusters. After being ultra-high-pressure jet-processed, the sensory properties of skimmed milk and its fermented curd were analyzed concurrently. The results demonstrated that UHPJ could alter the viscosity and color of skimmed milk, shortening curdling time from 4.5 h to 2.67 h, and that the texture of the curd fermented with this skimmed milk could be improved to varying degrees by changing the structure of casein. Thus, UHPJ has a promising application in the manufacture of fermented milk due to its ability to enhance the curdling efficiency of skimmed milk and improve the texture of fermented milk.

Viral Metagenomic Analysis of the Fecal Samples in Domestic Dogs (Canis lupus familiaris).

Canine diarrhea is a common intestinal illness that is usually caused by viruses, bacteria, and parasites, and canine diarrhea may induce morbidity and mortality of domestic dogs if treated improperly. Recently, viral metagenomics was applied to investigate the signatures of the enteric virome in mammals. In this research, the characteristics of the gut virome in healthy dogs and dogs with diarrhea were analyzed and compared using viral metagenomics. The alpha diversity analysis indicated that the richness and diversity of the gut virome in the dogs with diarrhea were much higher than the healthy dogs, while the beta diversity analysis revealed that the gut virome of the two groups was quite different. At the family level, the predominant viruses in the canine gut virome were certified to be Microviridae, Parvoviridae, Siphoviridae, Inoviridae, Podoviridae, Myoviridae, and others. At the genus level, the predominant viruses in the canine gut virome were certified to be Protoparvovirus, Inovirus, Chlamydiamicrovirus, Lambdavirus, Dependoparvovirus, Lightbulbvirus, Kostyavirus, Punavirus, Lederbergvirus, Fibrovirus, Peduovirus, and others. However, the viral communities between the two groups differed significantly. The unique viral taxa identified in the healthy dogs group were Chlamydiamicrovirus and Lightbulbvirus, while the unique viral taxa identified in the dogs with diarrhea group were Inovirus, Protoparvovirus, Lambdavirus, Dependoparvovirus, Kostyavirus, Punavirus, and other viruses. Phylogenetic analysis based on the near-complete genome sequences showed that the CPV strains collected in this study together with other CPV Chinese isolates clustered into a separate branch, while the identified CAV-2 strain D5-8081 and AAV-5 strain AAV-D5 were both the first near-complete genome sequences in China. Moreover, the predicted bacterial hosts of phages were certified to be Campylobacter, Escherichia, Salmonella, Pseudomonas, Acinetobacter, Moraxella, Mediterraneibacter, and other commensal microbiota. In conclusion, the enteric virome of the healthy dogs group and the dogs with diarrhea group was investigated and compared using viral metagenomics, and the viral communities might influence canine health and disease by interacting with the commensal gut microbiome.

Three-Component Synthesis of 2-Substituted Quinolines and Benzo[f]quinolines Using Tertiary Amines as the Vinyl Source.

A metal-free method for the construction of 2-substituted quinolines and benzo[f]quinolines from aromatic amines, aldehydes, and tertiary amines has been demonstrated. Cheap and readily available tertiary amines acted as the vinyl source. A new pyridine ring was selectively formed via [4 + 2] condensation that was promoted by ammonium salt under neutral conditions and an oxygen atmosphere. This strategy provided a new route for the preparation of various quinoline derivatives with different substituents at the pyridine ring, which provides the possibility of further modification.

An In Situ Fabricated Graphene/Bipolar Polymer Hybrid Material Delivers Ultralong Cycle Life over 15 000 Cycles as a High-Performance Electrode Material.

Organic electrode materials are promising for the future energy storage systems owing to their tunable structures, abundant resources, and environmental friendliness. Many advanced lithium-ion batteries with organic electrodes have been developed and show excellent performance. However, developing organic materials with overall superior performance still faces great challenges, such as low capacity, poor stability, inferior conductivity, and low utilization of active sites. To address these issues, a bipolar polymer (Fc-DAB) is designed and further polymerized in situ with three-dimensional graphene (3DG), offering a hybrid material (Fc-DAB@3DG) with a variety of merits. Fc-DAB possesses stable polymer backbone and multiple redox-active sites that can improve stability and capacity simultaneously. The embedded highly conductive 3DG network endows Fc-DAB@3DG with stable conductive framework, large surface area, and porous morphology all together, so the fast diffusion of ions/electrons can be achieved, leading to high utilization of active sites and enhanced electrochemical performance. As a result, Fc-DAB@3DG cathode delivers capacity of ≈260 mA h g-1 at 25 mA g-1 , ultra-long cycle life over 15 000 cycles at 2000 mA g-1 with retention of 99.999% per cycle, and remarkable rate performance. The quasi-solid Li-metal battery and full cell fabricated using this material also exhibit superior electrochemical performance.

Serum miR-497-5p serves as a diagnostic biomarker for acute coronary syndrome and predicts the occurrence of major adverse cardiovascular events after percutaneous coronary intervention.

This study aimed to investigate the diagnostic value of microRNA (miR)-497-5p in acute coronary syndrome (ACS) and its predictive value for the occurrence of adverse major adverse cardiovascular events (MACEs). Real-time quantitative polymerase chain reaction (RT-qPCR) was performed to detect the expression of serum miR-497-5p in 110 ACS patients and 82 controls. And miR-497-5p levels were found to be significantly elevated in the patients (P < 0.001). Pearson correlation coefficient confirmed that miR-497-5p was positively correlated with Gensini scores (r = 0.684). The area under the Receiver-operating characteristic (ROC) curve was 0.861, which significantly identified patients with ACS, and was confirmed by logistic regression (OR = 8.533, 95%CI = 4.113-17.787, P < 0.001). Kaplan-Meier and Cox regression was performed to evaluate the predictive value of miR-497-5p in the occurrence of MACEs during a 6-month follow-up after percutaneous coronary intervention (PCI) in patients with ACS. The results demonstrated that miR-497-5p was an independent predictor of MACEs (HR = 4.773, 95%CI = 1.569-12.036, P = 0.013) and that patients with high level of miR-497-5p were more likely to develop MACEs after PCI (long-rank P = 0.019). Finally, miR-497-5p positively correlated with endothelial proinflammatory and adhesion factors. Our study suggests that serum miR-497-5p is a potential diagnostic marker for ACS and its elevated levels can predict a high risk of MACEs in ACS patients after PCI. And this may be associated with vascular endothelial injury.

Triacylglycerol Composition of Butterfat Fractions Determines Its Gastrointestinal Fate and Postprandial Effects: Lipidomic Analysis of Tri-, Di-, and Mono-acylglycerols and Free Fatty Acids.

The lipolytic behaviors and postprandial effects of butterfat and its fractions (30L and 30S) procured by dry fractionation at 30 °C were investigated using in vivo digestion. A total of 142 triacylglycerols (TAGs), 64 diacylglycerols (DAGs), 14 monoacylglycerols (MAGs), and 7 free fatty acids (FFAs) in the butterfat fractions and their hydrolysates were identified by combining high-performance liquid chromatography coupled with electrospray ionization-tandem quadrupole time-of-flight mass spectrometry with solid-phase extraction. The first-step hydrolysis from TAGs to sn-1,2 DAGs occurred slower in the high-melting-temperature solid fat (30S) fraction, which is rich in long-chain FAs compared to that of the low-melting-temperature liquid oil (30L) fraction, which is rich in short-chain unsaturated FAs (the hydrolysis rates were 39.22% vs 60.11%, respectively, in the 30 min gastric phase), and these differences were also reflected in the delayed and relatively flat postprandial lipemia levels in rats force-fed with 30S fraction. This study revealed the importance of TAG composition and lipid physical state in regulating digestion and absorption, which is related to nutrition science and the dairy or pharmaceutical industry.

Efficacy and safety of pulsed radiofrequency modulation of thoracic dorsal root ganglion or intercostal nerve on postherpetic neuralgia in aged patients: a retrospective study.

BACKGROUND: Postherpetic neuralgia (PHN) is common in elderly patients and can be alleviated by pulsed radiofrequency (PRF). However, PRF treatments display different efficacy on different nerves. The purpose of this study was to evaluate the efficacy and safety of ultrasound-guided PRF modulation on thoracic dorsal root ganglion (DRG) or intercostal nerve (ICN) for PHN in aged patients and to provide a theoretical basis for clinical treatment. METHODS: We classified aged patients into two groups, DRG group and ICN group, based on the needle tip position. Visual analogue scale (VAS) and concise health status questionnaire (Short-form 36 health/survey questionnaire, SF-36) were used to evaluate the pain intensity and the life quality of the patients before and 2, 4 and 12 weeks after the PRF treatments. We also recorded the adverse reactions during the treatments. RESULTS: After the PRF treatment, the scores of VAS and SF-36 (assessing general health perception, social function, emotional role, mental health, and pain) improved significantly in both groups (P < 0.05). The mean VAS score in the DRG group was significantly lower than that in the ICN group 2 weeks after treatment, and remained for 12 weeks. The SF-36 scores in the DRG group were significantly higher than those in the ICN group (P < 0.05). We found a similar incidence of adverse reactions between the two groups (P > 0.05). CONCLUSIONS: PRF therapy is safe and effective for elderly patients with postherpetic neuralgia. However, PRF treatment in dorsal root ganglion is superior to that in intercostal nerve with improving VAS and SF-36 scores to a greater extent in older patients. TRIAL REGISTRATION: ChiCTR2100044176 .

Controlling and optimizing the morphology and microstructure of 3D interconnected activated carbons for high performance supercapacitors.

For an active electrode material, the morphology, microstructure and the effective specific surface area derived from them, have a dominant effect for the high performance supercapacitors. In this study, 3D interconnected activated carbons with controlled and optimized morphologies and porous structures were prepared from accessible carbon source and graphene oxide by a hydrothermal carbonization and following an activation method. Through optimizing the ratios of the precursors and reaction conditions, an electrode material with excellent specific surface area of 2318 m2 g-1, meso-/macro-pore ratio of 63.2% (meso-/macro-pore volume reached to 0.83 cm3 g-1), as well as an outstanding electrical conductivity of 46.6 S m-1, was obtained. The materials exhibit superior double-layer capacitive performances on a symmetric supercapacitor, delivering superior specific capacitance of 157 F g-1 in organic electrolyte system at current density of 0.5 A g-1, excellent energy density of 37.6 W h kg-1 with a power density of 7.1 kW kg-1 and good cycling stability of capacitance retention of 94% over 7000 cycles. These results offer a practical method to prepare the desired carbon electrode materials with controlled morphology and structure for high efficiency electrochemical energy storage devices.

Low-cost and scalable carbon bread used as an efficient solar steam generator with high performance for water desalination and purification.

Solar steam generation has been considered as a promising method for water desalination and purification. Achieving a simple, scalable and cost-effective method to fabricate solar-thermal materials with high performance is the key for its widespread application. Herein, we demonstrate high performance "carbon bread" as a solar steam generator via a facile one-pot baking process, which can be carried out in most household kitchens in our daily life without high-temperature carbonization. The carbon bread could achieve ∼85.9% conversion efficiency under 1 sun illumination and ∼81.7% efficiency even under 0.25 sun. The highly efficient solar steam generation performance benefits from the unique structure and properties of carbon bread: efficient and broadband light absorption, 3D interconnected hierarchical pores, excellent hydrophilicity and thermal insulation. This scalable material could generate fresh drinkable water from seawater and wastewater under ambient conditions. The successful demonstration of this simple and easily accessible carbon bread material could inspire the development of solar-driven water evaporators derived from low cost and commercially available raw chemicals through a simple manufacturing process for practical water desalination and purification on a large scale.

High performance Li-ion capacitor fabricated with dual graphene-based materials.

Lithium-ion capacitors (LICs) are now drawing increasing attention because of their potential to overcome the current energy limitations of supercapacitors and power limitations of lithium-ion batteries. In this work, we designed LICs by combining an electric double-layer capacitor cathode and a lithium-ion battery anode. Both the cathode and anode are derived from graphene-modified phenolic resin with tunable porosity and microstructure. They exhibit high specific capacity, superior rate capability and good cycling stability. Benefiting from the graphene-enhanced electrode materials, the all graphene-based LICs demonstrate a high working voltage (4.2 V), high energy density of 142.9 Wh kg-1, maximum power density of 12.1 kW kg-1 with energy density of 50 Wh kg-1, and long stable cycling performance (with ∼88% capacity retention after 5000 cycles). Considering the high performance of the device, the cost-effective and facile preparation process of the active materials, this all graphene-based lithium-ion capacitor could have many promising applications in energy storage systems.

Hot electron prompted highly efficient photocatalysis based on 3D graphene/non-precious metal nanoparticles.

High dispersibility and rapid electron transfer are required for a highly efficient catalyst. In this work, such materials have been designed using a scalable hydrothermal method from graphene oxide and a metal-organic framework. A cross-linked three-dimensional graphene (3DGraphene) material loaded with mono-dispersed nitrogen-doped carbon-coated metallic Co (NC@Co) nanoparticles with uniform size of 12.2 nm (3DGraphene/NC@Co) has been obtained and exhibits excellent activity for catalytic reduction of 4-nitrophenol to 4-aminophenol. Such high catalytic activity can be assigned to the highly energetic hot/free electrons arising from 3DGraphene under light illumination and the synergistic effect between 3DGraphene and NC@Co nanoparticles. The catalytic reaction can be finished in 240 s with NaBH4 as the reducing agent, and the corresponding rate constant (k) is 1.5 × 10-2 s-1, comparable to that of reported noble metal catalysts. Furthermore, the magnetic 3DGraphene/NC@Co materials are beneficial for the separation from the mixture after reaction and exhibit excellent cycling stability.

Toll-like receptor 5-mediated IL-17C expression in intestinal epithelial cells enhances epithelial host defense against F4+ ETEC infection.

Enterotoxigenic Escherichia coli (ETEC) are an important cause of post-weaning diarrhea (PWD) in piglets. The IL-17 cytokine family is well known to play important roles in the host defense against bacterial infections at the mucosa. Previously, we reported the potential role of IL-17A in clearing an ETEC infection in piglets. IL-17C, another member of the IL-17 family, is highly expressed in the intestinal epithelium, however, its role during an ETEC infection is still unclear. In this study, we demonstrate that F4+ ETEC induce IL-17C mRNA and protein expression in intestinal tissues as well as in porcine intestinal epithelial cells (IPEC-J2). This IL-17C production is largely dependent on TLR5 signaling in IPEC-J2 cells. Both F4+ ETEC infection and exogenous IL-17C increased the expression of antimicrobial peptides and tight junction proteins, such as porcine beta-defensin (pBD)-2, claudin-1, claudin-2 and occludin in IPEC-J2 cells. Taken together, our data demonstrate that TLR5-mediated IL-17C expression in intestinal epithelial cells enhances mucosal host defense responses in a unique autocrine/paracrine manner in the intestinal epithelium against ETEC infection.

Iron-Promoted Three-Component 2-Substituted Benzothiazole Formation via Nitroarene ortho-C-H Sulfuration with Elemental Sulfur.

A three-component procedure for the preparation of 2-substituted benzothiazoles from nitroarenes, alcohols, and sulfur powder is described. The reaction showed a good functional group tolerance to provide the heterocyclic products in moderate to good yields. The sequential assembly involving nitro reduction, C-N condensation, and C-S bond formation has been realized in one pot.

Increased serum bile acid level is associated with high-risk coronary artery plaques in an asymptomatic population detected by coronary computed tomography angiography.

BACKGROUND: There are limited data on the association between serum total bile acid level and coronary plaque characteristics. This study investigated the relationship between serum total bile acid level and the severity of coronary stenosis and coronary plaque features in an asymptomatic population using coronary computed tomography angiography (CTA). METHODS: A total of 1,137 consecutive participants with no known coronary artery disease (CAD) undergoing CTA as part of a general routine health evaluation were recruited. Serum total bile acid level and clinical parameters were assayed. Coronary stenosis and high-risk plaques features (napkin-ring sign, low-attenuation plaque, spotty calcification, positive remodelling) were evaluated. Associations between serum total bile acid concentration and high-risk coronary plaques was tested through univariate and multivariate analyses. RESULTS: A total of 101 high-risk coronary plaques subjects and 93 controls were eligible for study inclusion. The severity of coronary artery stenosis and high-risk coronary plaques increased with serum total bile acid level quartiles (all P<0.001). The independent predictor of high-risk coronary plaques in multivariate analysis was serum total bile acid level (P<0.001). Receiver operating characteristic (ROC) confirmed that serum total bile acid concentration significantly differentiated high-risk coronary plaques [the area under the curve (AUC) =0.876; P<0.001, with a sensitivity of 87.13% and a specificity of 86.02%]. CONCLUSIONS: Higher serum total bile acid level was associated with the severity of coronary artery stenosis and high-risk coronary artery plaques detected by CTA in asymptomatic populations.